During this 1/2 hour you can count on the following:
- We will be frantically scrambling to set up for the classes that should have been setup hours before.
- We will try to take the time to go around to room and introduce everyone.
- If anyone would like a tour of the hackerspace, this is the time to ask.
- If anyone has a project to show off, this will be the time to show it off. We will try to go around the room and give each person a couple minutes to show off any current projects they wish to bring down.
- If everything goes well, the first class will start at 6:30. :)
Please contact us (see the Contact Us page) with any questions / comments / suggestions.
Introduction to DipTrace: Hosted by Tim Anderson and Devin Hales
This class will cover designing PCBs and Schematics in the Diptrace
Software including importing and making new components and patterns,
setting up and enforcing design rules, considerations for
manufacturing, gerber file generation and more. The class will cover
these topics through the design from the ground up of an FTDI breakout
board.
Cheers,
-Tim
P.S. Feel free to bring down a laptop (we will have WiFi and Power) to follow along.
Members LAN Party. Members please feel free to bring a friend or two. This is another one where we break out the VPN, Video Conferencing, and the game servers!
Bring your gaming boxes, headphones, energy drinks, and game. Plan on CS 1.6, UT, UT3, SCII, TF2, and whatever else you can handle.
During this 1/2 hour you can count on the following:
- We will be frantically scrambling to set up for the classes that should have been setup hours before.
- We will try to take the time to go around to room and introduce everyone.
- If anyone would like a tour of the hackerspace, this is the time to ask.
- If anyone has a project to show off, this will be the time to show it off. We will try to go around the room and give each person a couple minutes to show off any current projects they wish to bring down.
- If everything goes well, the first class will start at 6:30. :)
Please contact us (see the Contact Us page) with any questions / comments / suggestions.
Join the members of the circuit-bent rock band CMKT4 for a workshop on building your very own EconoMIC Bottle Cap Contact Microphone (from Creme DeMentia). CMKT4 will show you how to solder up a piezo-electric pickup and house it sturdily in a recycled bottle-cap housing of their own design! Stick around for a set from the band as the tool-handle dip on your freshly built contact microphone dries. Additional take-home kits and other surprises will be available, come build a mic and see and hear some of the circuit-bent instruments you’ve read about on www.GetLofi.com up close. Bring your own instruments and objects to amplify!
Calendar
Agenda
Get your solder on
Membership is due on the last Saturday of the month. Please plan accordingly.
After the projects die down the games come out. Once a month stay REALLY late and join us in Quake 3, StarCraft 1, Unreal Tournament, and more!
Meeting at tT for all current members.
Please check our front page / calendar for class details. These should be posted at least 1-2 weeks prior to this event.
These classes are free to the public to sit in on.
Some classes may offer kits for a fee. (Usually $10-$20).
Hosted by theTransistor.
Bring down your projects to show off, meet other makers, or just for the free classes!
During this 1/2 hour you can count on the following:
- We will be frantically scrambling to set up for the classes that should have been setup hours before.
- We will try to take the time to go around to room and introduce everyone.
- If anyone would like a tour of the hackerspace, this is the time to ask.
- If anyone has a project to show off, this will be the time to show it off. We will try to go around the room and give each person a couple minutes to show off any current projects they wish to bring down.
- If everything goes well, the first class will start at 6:30. :)
Please contact us (see the Contact Us page) with any questions / comments / suggestions.
Introduction to DipTrace: Hosted by Tim Anderson and Devin Hales
This class will cover designing PCBs and Schematics in the Diptrace
Software including importing and making new components and patterns,
setting up and enforcing design rules, considerations for
manufacturing, gerber file generation and more. The class will cover
these topics through the design from the ground up of an FTDI breakout
board.
Cheers,
-Tim
P.S. Feel free to bring down a laptop (we will have WiFi and Power) to follow along.
Free class on Chip Amplifiers and Surface Exciters. Kits will be available for $30. See http://thetransistor.com/?p=1978 for full details.
You are welcome to sit in on the class without purchasing a kit if you would like. Please email Alex [at] thetransistor [dot] com to reserve your kit
Membership is due on the last Saturday of the month. Please plan accordingly.
Members LAN Party. Members please feel free to bring a friend or two. This is another one where we break out the VPN, Video Conferencing, and the game servers!
Bring your gaming boxes, headphones, energy drinks, and game. Plan on CS 1.6, UT, UT3, SCII, TF2, and whatever else you can handle.
After the projects die down the games come out. Once a month stay REALLY late and join us in Quake 3, StarCraft 1, Unreal Tournament, and more!
Meeting at tT for all current members.
bring your pwnage
Please check our front page / calendar for class details. These should be posted at least 1-2 weeks prior to this event.
These classes are free to the public to sit in on.
Some classes may offer kits for a fee. (Usually $10-$20).
Hosted by theTransistor.
Bring down your projects to show off, meet other makers, or just for the free classes!
During this 1/2 hour you can count on the following:
- We will be frantically scrambling to set up for the classes that should have been setup hours before.
- We will try to take the time to go around to room and introduce everyone.
- If anyone would like a tour of the hackerspace, this is the time to ask.
- If anyone has a project to show off, this will be the time to show it off. We will try to go around the room and give each person a couple minutes to show off any current projects they wish to bring down.
- If everything goes well, the first class will start at 6:30. :)
Please contact us (see the Contact Us page) with any questions / comments / suggestions.
Join the members of the circuit-bent rock band CMKT4 for a workshop on building your very own EconoMIC Bottle Cap Contact Microphone (from Creme DeMentia). CMKT4 will show you how to solder up a piezo-electric pickup and house it sturdily in a recycled bottle-cap housing of their own design! Stick around for a set from the band as the tool-handle dip on your freshly built contact microphone dries. Additional take-home kits and other surprises will be available, come build a mic and see and hear some of the circuit-bent instruments you’ve read about on www.GetLofi.com up close. Bring your own instruments and objects to amplify!
More details on our homepage at http://thetransistor.com
Membership is due on the last Saturday of the month. Please plan accordingly.
After the projects die down the games come out. Once a month stay REALLY late and join us in Quake 3, StarCraft 1, Unreal Tournament, and more!
Meeting at tT for all current members.